BetaFPV Air65 Brushless Whoop Quadcopter-Racing-ELRS
BetaFPV Air65 Brushless Whoop Quadcopter-Racing-ELRS
Defying gravity and embarking on an unforgettable journey with Air65! Prepare for an explosive, now upgraded and more impressive than the Meteor Series. Weighing a mere lighter 17g yet boasts next-level performance. Equipped with Air Canopy, Air65 Brushless Whoop Frame, Air Brushless Flight Controller(4IN1). Launching 2 Propulsion System versions: Racing and Freestyle. Whether you crave high-speed agility or smooth, fluent flight, Air65 fulfills every pilot's desires. It reigns as the Ultralight King and Reaction Giant!
-
Experience a New Level of Lightweight Racing and Freestyle Version Flying with our 1S 65mm Indoor Whoop. Weighing in at just 17.1g, it offers an exhilarating and agile flying experience.
-
Air Brushless Flight Controller(4IN1), the first 1S FC that uses the G473 processor which has superior computing power, and is equipped with ICM42688P gyroscope, This all-in-one solution seamlessly integrates FC, ESC, OSD, and Onboard 5.8G 25mw~400mw VTX. and even offers an optional ELRS receiver, weighing only 2.9g.
- Racing/Freestyle Version Propulsion Systems are specifically designed for the lightweight 65mm whoop, delivering a thrilling flight experience tailored to the needs of every pilot.
- Discover the Air65, accompanied by the Z-Folding LAVA Series battery, enabling the ultimate lightweight flight experience. Take to the skies with unparalleled agility and weightlessness.
- Express your unique style with various part options. From 65mm frames to canopies and propellers, offering pilots a diverse selection of captivating colors. Combine with BETAFPV waterslide decals to effortlessly infuse your whoop drones with a personalized.
Specification
- Item: Air65 Brushless Whoop Quadcopter
- Weight: 17.1g
- Wheelbase: 65mm
- Frame: Air65
- Canopy: Air Canopy
- FC & ESC: Air Brushless Flight Controller(4IN1 Version)
- VTX: Onboard 5.8G 25mw~400mw VTX
- Camera: C03 Camera
- Motor: 0702SE|27000KV(Racing Version), 0702SE|23000KV(Freestyle Version)
- Props: GF 1219S 3B(Racing Version), HQ 31mm Ultralight(Freestyle Version)
- Battery Connector: BT2.0 U Cable Pigtail
- Recommend Battery: LAVA 1S 260/300mAh
- Flight Time(4.35v-3.3v): 4min(LAVA 260mAh)
- RX Version: External ELRS 2.4G Lite(Included in quad)
Flight Controller & ESC
The first 1S FC that uses the G473 processor, Air Brushless Flight Controller(4IN1) with balanced performance and lightness, only 2.9g. Powered and Industry-leading ICM42688P gyroscope, powering superior computing power and lightning-fast response times for precise flight execution compared to the F411. With multiple UART port options, it supports various function expansions. This all-in-one solution seamlessly integrates FC, ESC, OSD, and VTX, and even offers an optional ELRS receiver. The micro-sized OSD chip is customed. Immerse yourself effortlessly in the racing and freestyle world of Finger-Tip control, where unparalleled precision and responsiveness of the Air65 await.
Package
- 1 * Air65 Brushless Whoop Quadcopter
- 1 * Air Canopy
- 4 * GF 1219S 3B Props(Racing Version) / HQ 31mm Ultralight 3B Props(Freestyle Version)
- 1 * Pack of Screws
- 1 * 4Pin Adapter Cable
- 1 * USB Type-C Adapter Board
Share
First I want to say that the buying experience from here was excellent. Communication and responsiveness was phenomenal.
The drone itself is really fast and good quality. I would recommend it to anybody looking for a 65mm tinywhoop. I have had it for about a week now. I did discover a couple potential issues, but nothing you wouldn’t be able to get through. First, is that the antenna gets loose from the ufl connector pretty easy. I took mine off and squeezed it to tighten it with some tweezers so it grips much better. I did over tighten it at first so don’t over do this. There is also an option to zip tie it down. Second, the camera mount in the lowest setting can be a fairly steep camera angle. I got used to this pretty quick but some people have made extensions with a zip tie or longer screw with some sort of spacer. Also, there is a mount on thingverse that can be 3d printed to get a lower camera angle.